Maxtor MaxAttach NAS 4000 User Manual

MaxAttach NAS 4000 Quick Start Card

™

MaxAttach NAS 4000 is an easy to use network rack mount storage appliance for file sharing on

Microsoft and UNIX/Linux platforms. Ideal for your office, business or workgroup, it presents the

most cost-effective way to increase your network storage, and it eliminates the need for expen-

sive server upgrades. It also includes pre-loaded server software for plug-and-work operation.

Unit Information

Please record the following information found on the bottom of the MaxAttach unit. This

information will be needed to identify your unit for configuration or Maxtor Support.

❍ Model Number:

❍ Serial Number/Device ID:

Necessary Equipment for Installation

To connect, install and administer your MaxAttach NAS 4000, you will need a network

hub or switch. You will also need the following capabilities on your workstation:

❍ Windows 95/98/NT (SP5)/2000 with network access

❍ Internet Explorer v4.01 or later, or Netscape v4.08 or later

❍ 10/100 Mbps Ethernet Network Interface Card, (NIC)

❍ Software drivers for the NIC

❍ TCP/IP Enabled

❍ CD-ROM drive