Panasonic Telephone KX PW10CL2 User Manual

Quick Reference Guide for  
Number Display Service  
KX-PW30CL2  
KX-PW10CL2  
 
Number Display Service Functions  
Setting up  
Searching for a phone number  
1
2
Subscribe to NTT, and then set the display to  
アリ ” (ON).  
Using the Number Display Service, this unit can store  
phone numbers and the date and time of the calls in  
memory. [Up to 30 calls, except 99 calls, can be stored  
くるくる電話帳  
くるくる電話帳  
登録 選択 機能  
in  
(search dial).] By using    (search dial), you  
can search for the phone number, and the date and  
time of a call on the display of the unit.  
1
4
7
2
5
8
0
3
6
9
[When you have not answered (a) call(s)]  
チャクシンカ  
アリマシタ  
ストップ  
着信メモリー  
電話帳表示切換  
1. Press  
2. Press  
3. Press  
(function).  
機能  
選択  
1
4
7
2
5
8
0
3
6
9
1
3
3
.
(select) to select “ ” (ON).  
くるくる電話帳  
ストップ  
ON  
N O . テ  
ィスフ°レイ= アリ  
Changes each time you  
press  
(function).  
機能  
着信メモリー  
1. Press   
(received call memory).  
N O . テ  
ィスフ°レイ= ナシ  
OFF  
くるくる電話帳  
2. Rotate   (search dial) to the right.  
4. Press  
5. Press  
(record).  
登録  
(Rotating to the right will change the display from  
the latest call and to the left, from the oldest one.)  
ストップ  
(stop).  
 means new calls which have not been  
Note:  
checked.  
電話帳表示切換  
If you do not set the unit to “ アリ ” (ON), the first  
bell will ring shorter than usual, even if you receive  
the service.  
Each time you press    (operation guide),  
the display will change from the number to the  
date and time.  
Up to 14 digits can be displayed.  
When you cancel the service, select “ ナシ ” (OFF)  
in step 3.  
ストップ  
3. When finished, press  
(stop).  
Note:  
In step 1, if there are no calls in memory,  
 will be displayed.  
チャクシンカ  
アリマセン  
When there are more than 30 calls in memory, they  
will be erased from the oldest one, even if you have  
not viewed them.  
If the caller subscribes to a Dial-in Service,  
- One of the numbers contacting the Dial-in Service  
will be displayed.  
OR  
- When subscribing to a Dial-in Service using  
several telephone lines in a company, the phone  
number displayed depends on the line being used.  
The date and time of the call will be stored using the  
time programmed in the unit. Program the correct  
time.  
 
3
Number Display Service Functions  
くるくる電話帳  
くるくる電話帳  
Sending a fax with     
        (search dial)  
Calling with   (search dial)  
3
4
着信メモリー  
Document Tray  
Handset  
Handset  
スピーカーホン  
画質  
くるくる電話帳  
スタート/コピー  
着信メモリー  
スタート/コピー  
くるくる電話帳  
1. Open the document tray and adjust the guides.  
Insert the document FACE DOWN.  
Insert up to 5 sheets at a time.  
着信メモリー  
1. Press    (received call memory).  
2.  
Insert the document (a beep will be heard), and  
then select the resolution by pressing  
くるくる電話帳  
画質  
(resolution).  
2. Rotate    (search dial) until the number you  
want to dial is displayed.  
Up to 14 digits can be displayed.  
ガシツ= フツウ  
STANDARD  
FINE  
スピーカーホン  
ガシツ= チイサイ  
3. Lift the handset, or press   (speakerphone).  
スタート/コピー  
You can also dial by pressing    (start/copy).  
HALF TONE  
ガシツ= シャシン  
 (If a document is inserted, the unit will send a    
 fax.)  
3. Press    (received call memory).  
くるくる電話帳  
4. Talk to the other party.  
4. Rotate    (search dial) until the number you  
5. When finished, replace the handset, or press  
スピーカーホン  
want to dial is displayed.  
    (speakerphone).  
スタート/コピー  
Press   (start/copy).  
5.  
After the message is displayed, the unit will start to  
send the fax.  
Note:  
You can also call using the following procedure.  
スピーカーホン  
1. Lift the handset, or press   (speakerphone).  
- Dial 184 or 186, if required.  
着信メモリー  
Note:  
If the line is busy, the unit will automatically redial  
the number up to three times at one minute  
intervals.  
2. Press   (received call memory).  
くるくる電話帳  
(Automatic Redialing)  
If you want to dial 184 or 186 to send a fax, proceed  
3. Rotate    (search dial) until the number you  
want to dial is displayed.  
as follows.  
スタート/コピー  
1. Insert the document, and then lift the handset.  
4. Press    (start/copy) while a long beep is   
heard.  
2. Dial 184 or 186.  
- If you dialed 184 or 186, press  
スタート/コピー  
   (start/copy) when 3 beeps are heard.  
着信メモリー  
3. Press    (received call memory).  
くるくる電話帳  
4. Rotate   (search dial) until the number you  
want to dial is displayed.  
スタート/コピー  
5. Press   (start/copy) when 3 beeps are heard.  
スタート/コピー  
6. Press    (start/copy) again.  
 
4
Number Display Service Functions  
Printing a caller list  
5
ex. If you receive a Dial-in Service:  
着信リスト  
1998.1.1  1200  
ダイヤルイン  
No.  
年 月 日   
1997.12.31  
1997.12.30  
1997.12.30  
時分  
相手局名  
1
1530  
1354  
830  
4321(ヤキ)  
4320(1)  
4321(ヤキ)  
09876543・・  
01234567・  
コウシュウデンワ  
2
3
マーク:ミカクニンノ チャクシンメモリー  
No., 年月日(year/month/day), 時分(hour/minute)  
The unit prints the date and time of the received calls from the most recent call. (up to 30 calls)  
■相手局名(caller's phone number)    
The unit prints the phone number of the caller. If the caller’s name or phone number cannot be  
displayed, a message will be printed out instead. “ ” means the call has not been checked.  
Up to 20 digits, including “ ”, can be printed.  
■ダイヤルイン(Dial-in)  
The unit prints 4 digits after the phone number which contacts the Dial-in Service, whether  
it was a voice or a fax call, and if the call was received by the main unit or the handset.  
If you do not subscribe to a Dial-in Service, disregard this section.  
1. Press 着信メモリ(received call memory).  
着信メモリー  
2. Press スタート/コピ(start/copy).  
ストップ  
3. When finished, press  
 (stop).  
Note:  
1
4
7
2
5
8
0
3
6
9
When there are more than 30 calls in memory,  
the unit will erase calls from the oldest one.  
ストップ  
If you press   (stop) in step 3, all calls will be noted  
as viewed ones, so “ ” will not appear on the display.  
will also not be displayed.  
ストップ  
チャクシンリマシタ  
スタート/コピー  
 
5
Number Display Service Functions  
You can erase phone numbers of the callers stored in the memory.  
Erasing a phone number  
Erasing all of the phone numbers  
6
7
着信メモリー  
着信メモリー  
消去  
消去  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
くるくる電話帳  
ストップ  
スタート/コピー  
スタート/コピー  
1. Press着信メモ (received call memory).  
1. Press 着信  (received call memory).  
くるくる電話帳  
消去  
2. Press    (erase).  
2. Rotate   (search dial) until the number you want  
スタート/コピー  
to erase is displayed.  
3. Press  
(start/copy).  
消去  
3. Press   (erase).  
スタート/コピー  
4. Press   (start/copy).  
ストップ  
5. When finished, press   (stop).     
PFQX1239ZA  
 

Miele Microwave Oven H 4050 BM User Manual
MTD Lawn Mower Series 430 Thru 439 User Manual
Multiquip Saw TP24X User Manual
Music Hall Stereo Amplifier A702 User Manual
NEC Telephone 2400IPX User Manual
Nikon Camera Accessories EN EL4a User Manual
Onkyo Stereo System TX DS989 User Manual
Panasonic Answering Machine KX TGH220E User Manual
Panasonic Digital Camera DMC FX38 User Manual
Panasonic Telephone KW WP1050E User Manual