Panasonic Blu ray Player DMP BD93 User Manual

Owner’s Manual  
Blu-ray DiscTM Player  
Model No. DMP-BDT270  
DMP-BD93  
Unless otherwise indicated, illustrations in these Owner’s Manual are of DMP-BDT270.  
Firmware updates  
Panasonic is constantly improving the unit’s firmware to ensure  
that our customers are enjoying the latest technology.  
Panasonic recommends updating your firmware as soon as you  
are notified.  
For details, refer to “Firmware updates” (> 13) or  
Thank you for purchasing this product.  
Please read these instructions carefully before using this product, and save this manual for future use.  
If you have any questions, visit :  
P
PC  
SQW0274  
 
Precautions  
Wireless LAN connection  
The following limits are in place regarding the usage of this unit. You  
must be aware of these limits before using this unit.  
Panasonic will in no way be responsible for any incidental damage  
which may arise due to a failure to obey these limits, or to any  
condition of use or disuse of this unit.  
Data transmitted and received over radio waves may be  
intercepted and monitored.  
This unit contains delicate electronic components.  
Please use this unit in the manner in which it was intended and  
follow the following points:  
WARNING  
Unit  
To reduce the risk of fire, electric shock or product damage,  
Do not expose this unit to rain, moisture, dripping or splashing.  
Do not place objects filled with liquids, such as vases, on this unit.  
Use only the recommended accessories.  
Do not remove covers.  
Do not repair this unit by yourself. Refer servicing to qualified  
service personnel.  
Do not expose this unit to high temperatures or direct sunlight.  
Do not bend, or subject this unit to strong impacts.  
Keep this unit away from moisture.  
AC power supply cord  
The power plug is the disconnecting device. Install this unit so that  
the power plug can be unplugged from the socket outlet  
immediately.  
Do not disassemble or alter this unit in any way.  
Restriction on use of  
unauthorized copied content  
CAUTION  
Unit  
This unit utilizes a laser. Use of controls or adjustments or  
This unit adopts the following technology for copyright protection.  
performance of procedures other than those specified herein may  
result in hazardous radiation exposure.  
Do not place sources of naked flames, such as lighted candles, on  
this unit.  
Cinavia Notice  
This product uses Cinavia technology to limit the use of unauthorized  
copies of some commercially-produced film and videos and their  
soundtracks. When a prohibited use of an unauthorized copy is  
detected, a message will be displayed and playback or copying will be  
interrupted.  
More information about Cinavia technology is provided at the Cinavia  
request additional information about Cinavia by mail, send a postcard  
with your mailing address to:  
Placement  
To reduce the risk of fire, electric shock or product damage,  
Do not install or place this unit in a bookcase, built-in cabinet or in  
another confined space. Ensure this unit is well ventilated.  
Do not obstruct this unit’s ventilation openings with newspapers,  
tablecloths, curtains, and similar items.  
Do not place the unit on amplifiers/receivers or equipment that  
may become hot. The heat can damage the unit.  
Cinavia Consumer Information Center, P.O. Box 86851, San Diego,  
CA, 92138, USA.  
Batteries  
Mishandling of batteries can cause electrolyte leakage and may  
cause a fire.  
To dispose or transfer this unit  
Danger of explosion if battery is incorrectly replaced. Replace only  
with the type recommended by the manufacturer.  
When disposing of the batteries, please contact your local  
authorities or dealer and ask for the correct method of disposal.  
Do not mix old and new batteries or different types at the same  
time.  
The unit may keep the user settings information in the unit. If you  
discard this unit either by disposal or transfer, then follow the  
procedure to return all the settings to the factory presets to delete the  
user settings. (> 28, “To return all settings to the factory preset.”)  
The operation history may be recorded in the memory of this unit.  
Do not heat or expose to flame.  
Information on Disposal in other Countries outside  
the European Union  
Do not leave the battery(ies) in a car exposed to direct sunlight for  
a long period of time with doors and windows closed.  
Do not take apart or short circuit.  
Do not recharge alkaline or manganese batteries.  
Do not use batteries if the covering has been peeled off.  
This symbol is only valid in the European Union.  
If you wish to discard this product, please contact  
your local authorities or dealer and ask for the  
correct method of disposal.  
Remove batteries if you do not intend to use the remote control for a  
long period of time. Store in a cool, dark place.  
[BD93]  
AC adaptor  
Conforms to UL STD 60065.  
This AC adaptor operates on AC between 110 V and 240 V.  
But  
Certified to CAN/CSA STD C22.2 No.60065.  
In the U.S.A. and Canada, the AC adaptor must be connected to a  
120 V AC power supply only.  
When connecting to an AC supply outside of the U.S.A. or  
Canada, use a plug adaptor to suit the AC outlet configuration.  
(Inside of product)  
Download from Www.Somanuals.c-om3. -All Manuals Search And Download.  
   
INSTRUCTIONS . . . . . . . . . . .2  
Precautions . . . . . . . . . . . . . . . .3  
Settings  
Option menu . . . . . . . . . . . . . . 21  
Setup menu. . . . . . . . . . . . . . . 23  
Accessories . . . . . . . . . . . . . . . .5  
Playable media. . . . . . . . . . . . . .6  
Control reference guide . . . . . . .8  
Troubleshooting guide . . . . . . 28  
Specifications . . . . . . . . . . . . . 32  
Limited Warranty. . . . . . . . 36, 37  
Referencia rápida en español  
Connections and settings  
(Spanish Quick Reference). . . . 38  
Index . . . . . . . . . . . . . Back cover  
Connecting to a TV . . . . . . . . .10  
Connecting to  
Connecting to the network . . . .11  
Settings . . . . . . . . . . . . . . . . . .12  
Inserting or  
removing media . . . . . . . . . . .14  
HOME menu . . . . . . . . . . . . . .15  
Playback. . . . . . . . . . . . . . . . . .16  
Network Service  
(Enjoying Netflix, etc.) . . . . . .18  
Home Network feature . . . . . . .19  
“HDMI CEC. . . . . . . . . . . . . . .21  
Download from Www.Somanuals.c-om4. -All Manuals Search And Download.  
Getting started  
Getting started  
Accessories  
Unit and media care  
Check the supplied accessories before using this  
unit.  
Clean this unit with a soft, dry  
cloth  
Never use alcohol, paint thinner or benzine to  
clean this unit.  
Before using chemically treated cloth, carefully  
read the instructions that came with the cloth.  
1
Remote control  
[BDT270] (N2QAYB001023)  
[BD93] (N2QAYB001024)  
Batteries for remote control  
[BDT270] AC power supply cord  
(K2CB2YY00092)  
2
1
This unit’s lens  
1
[BD93] AC adaptor  
Use the lens cleaner (not supplied) to clean the  
unit’s lens.  
(SAE0001)  
[For_Canada]  
Clean discs  
The enclosed Canadian French label sheet corresponds  
to the English display on the unit.  
DO NOT  
DO  
Product numbers are provided in this Owner’s Manual  
correct as of December 2014. These may be subject to  
change.  
Do not use AC power supply cord and AC adaptor with  
other equipment.  
Do not use any other AC power supply cords and AC  
adaptors except the supplied one.  
Wipe with a damp cloth and then wipe dry with a  
dry cloth.  
Disc handling precautions  
Handle discs by the edges to avoid inadvertent  
scratches or fingerprints on the disc.  
Do not attach labels or stickers to discs.  
Do not use disc cleaning sprays, benzine,  
thinner, static electricity prevention liquids or  
any other solvent.  
Using the remote control  
Insert the batteries to the terminal so that it (i  
and j) matches those in the remote control.  
Do not use the following discs:  
– Discs with exposed adhesive from removed  
stickers or labels (rented discs, etc.).  
– Discs that are badly warped or cracked.  
– Irregularly shaped discs, such as heart  
shapes.  
R6/LR6, AA  
(Alkaline or manganese batteries)  
Point it at the remote control signal sensor on this  
unit. (> 9)  
Download from Www.Somanuals.c-om5. -All Manuals Search And Download.  
         
Getting started  
Playable media  
Media  
markings  
Device  
Device types  
Contents format  
BD-Video  
Video  
Video,  
JPEG, MPO*1,  
AAC, ALAC, DSD*1,  
FLAC, MP3, WAV, WMA  
BD-RE  
BD  
Video, MKV, Xvid*2,  
AAC, ALAC, DSD*1,  
FLAC, MP3, WAV, WMA  
BD-R  
DVD-Video  
Video  
DVD-R  
Video, AVCHD, MKV,  
Xvid*2,  
JPEG, MPO*1,  
AAC, ALAC, DSD*1,  
FLAC, MP3, WAV, WMA  
DVD  
DVD-R DL  
DVD-RW  
Video, AVCHD  
Music [CD-DA]  
+R/+RW/+R DL  
Music CD  
MKV, Xvid*2,  
CD  
JPEG, MPO*1,  
CD-R  
CD-RW  
AAC, ALAC, FLAC,  
MP3, Music [CD-DA],  
WAV, WMA  
MKV, MP4, MPEG2,  
Xvid*2,  
USB devices  
(up to 4 TB)  
JPEG, MPO*1,  
USB  
AAC, ALAC, DSD*1,  
FLAC, MP3, WAV, WMA  
*1  
[BDT270] only  
*2 Canada only  
See pages 7 and 32 for more information on the types of content that can be played.  
Download from Www.Somanuals.c-om6. -All Manuals Search And Download.  
 
Getting started  
Types of discs that cannot be  
played in this unit  
Music CD  
Operation and sound quality of CDs that do not  
comply with CD-DA specifications (copy control  
CDs, etc.) cannot be guaranteed to work.  
The digital audio content side of a DualDisc  
does not meet the technical specifications of  
the Compact Disc Digital Audio (CD-DA) format  
so playback may not be possible.  
Any other disc that is not specifically  
supported or previously described.  
DVD-RAM  
Super Audio CD  
Photo CD  
DVD-Audio  
Video CD and Super Video CD  
HD DVD  
USB device  
This unit does not guarantee connection with all  
USB devices.  
Region management information  
The unit can play back BD-Video/DVD-Video  
discs of the following regions codes, including  
ALL”:  
This unit does not support USB device  
charging.  
FAT12, FAT16, FAT32, and NTFS file systems  
are supported.  
Example:  
BD-Video  
DVD-Video  
This unit supports USB2.0 High Speed.  
This unit supports an HDD formatted in FAT32  
and NTFS. If the HDD is not recognized, the  
power to the HDD may not be supplied. Supply  
power from an external source.  
1
The unit cannot playback discs in PAL format.  
Finalize  
It may not be possible to play the above media in some  
cases due to the type of media, the condition of the  
recording, the recording method, and how the files were  
created.  
The producers of the disc can control how discs are  
played, so you may not always be able to control play as  
described in this Owner’s Manual. Read the disc’s  
instructions carefully.  
Any DVD-R/RW/R DL, +R/+RW/+R DL and  
CD-R/RW that are recorded by a recorder need to  
be finalized by the recorder to play on this unit.  
Please refer to the recorder’s owner’s manuals.  
BD-Video  
This unit supports high bit rate audio (Dolby®  
Digital Plus, Dolby® TrueHD, DTS-HD High  
Resolution AudioTM and DTS-HD Master  
AudioTM) adopted in BD-Video.  
If “Dolby D/Dolby D +/Dolby TrueHD” is set to  
“PCM” and “DTS Neo:6” is set to “Off”, the  
maximum possible number of Dolby® sound is  
2ch PCM. (> 24)  
[BDT270]  
3D  
3D videos and 3D still pictures can be played  
back when this unit is connected to a 3D  
compatible TV using a High Speed HDMI  
Cable.  
2D video can be enjoyed as 3D virtually. (> 22)  
Download from Www.Somanuals.c-om7. -All Manuals Search And Download.  
     
Getting started  
Control reference guide  
When other Panasonic devices respond to the  
remote control of the unit, change the remote  
control code. (> 27)  
1
2
Turn the unit on and off  
TV operation buttons  
You can operate the Panasonic TV using this  
unit’s remote control. Some buttons may not  
work depending on the TV.  
[Í TV] : Turn the TV on and off  
[i j VOL] : Adjust the volume  
Select title numbers, etc./Enter numbers or  
[BDT270] characters  
22  
2 11  
1
10  
11  
[BD93]  
1
2
12  
3
13  
14  
15  
16  
3
4
5
6
Cancel  
Basic playback control buttons (> 16)  
Show Closed Caption setup screen  
(> 22, 25)  
Show Pop-up menu/Top menu (> 16)  
Show Option menu (> 21)  
Colored buttons (red, green, yellow, blue)  
Used for various purposes depending on the  
display.  
4
5
4
3
14  
16 12  
7
8
9
6
7
17  
18  
19  
20  
10 Transmit the remote control signal  
11 Open or close the disc tray (> 14)  
12 Show the status messages (> 17)  
13 [BDT270] Switch Secondary Video on/off  
(Picture-in-picture) (> 22)  
8
9
21  
14 Change soundtrack (> 16)  
15 [BDT270] Show MiracastTM screen (> 19)  
16 Show the Home Screen of Network Service  
(> 18)  
17 Exit the Menu screen  
18 Show Netflix screen (> 18)  
19 Show HOME menu (> 15)  
20 [3, 4, 2, 1] : Move the highlight for selection  
[OK] : Confirm the selection  
(;1) : Frame-by-frame (> 16)  
21 Return to previous screen  
22 [BD93] Show Setup menu (> 23)  
Available keys for HDMI CEC (> 21)  
3
5
8
9
Number keys  
Basic playback control buttons  
Option button  
Colored buttons (red, green, yellow, blue)  
17 Exit button  
20 [3, 4, 2, 1]/[OK] button  
21 Return button  
Download from Www.Somanuals.c-om8. -All Manuals Search And Download.  
   
Getting started  
[BDT270]  
5
6
7
8
1
2
3 4  
[BD93]  
5
1
2
1
2
3
Disc tray (> 14)  
USB port (> 14)  
POWER LED  
The LED lights when the unit is turned on,  
and flashes when error occurs. (> 31)  
Remote control signal sensor  
Distance: Within approx. 7 m (23 feet)  
Angle: Approx. 20e up and down, 30e left and  
right  
5
Open or close the disc tray (> 14)  
[BDT270] Stop (> 16)  
[BDT270] Start play (> 16)  
Standby/on switch (Í/I) (> 12)  
Press to switch the unit from on to standby  
mode or vice versa. In standby mode, the unit  
still consumes a small amount of power.  
6
7
8
4
Rear panel terminals (> 10, 11)  
Download from Www.Somanuals.c-om9. -All Manuals Search And Download.  
 
Connections and settings  
Connections and settings  
Connecting to a TV  
Connect the power supply cord after making all connections.  
Before making any connections, we recommend that you temporarily disconnect all the units from AC  
power outlet.  
[BDT270]  
[BD93]  
HDMI IN  
[BDT270]  
HDMI cable  
[BD93]  
AC adaptor (supplied)  
To an AC outlet  
AC power supply cord  
(supplied)  
Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended  
that you use Panasonic’s HDMI cable. When outputting 1080p or [BDT270] 24p (4K) signal, please use  
HDMI cables 5.0 meters (16.4 ft.) or less.  
This unit consumes a small amount of AC power (> 32) even when turned off in standby mode. For  
the purpose of energy conservation, the unit should be disconnected if you will not be using it for  
extended period of time.  
Connecting to an amplifier/receiver  
[BDT270]  
[BD93]  
HDMI cable  
HDMI cable  
[BDT270]  
[BD93]  
HDMI OUT  
(ARC)  
HDMI IN  
(ARC)  
HDMI IN  
Amplifier/receiver  
Set “Digital Audio Output” (> 24).  
[BDT270] When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV,  
then connect the TV and the amplifier/receiver. Please note, however, that the audio can only be up  
to 5.1ch.  
When using the TV or amplifier/receiver that does not have the indication of “(ARC)”  
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected  
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.  
 
- 10 -  
     
Connections and settings  
Connecting to the network  
The following services can be used when this unit is connected to broadband.  
Firmware can be updated (> 13)  
You can enjoy BD-Live (> 17)  
You can enjoy Network Service (> 18)  
You can access other devices (Home Network) (> 19)  
[BDT270] This unit supports Wi-Fi Direct® and can make a wireless connection to wireless devices  
without router. You can use this function when enjoying Home Network feature, etc. Internet access is  
not available while connected via Wi-Fi Direct®. (> 19, 25)  
For details about connection method, refer to the instructions supplied with the connected equipment.  
Wireless LAN connection  
This unit has built-in Wi-Fi® and can be connected to a wireless router.  
Internet  
Wireless router, etc.  
For up-to-date compatibility information on your wireless router, refer to  
(This site is in English only.)  
For additional information about this unit refer to  
The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.  
See page 3 for the precautions for wireless LAN connection.  
[BDT270]  
LAN cable connection  
LAN Cable  
Broadband router, etc.  
Internet  
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.  
Inserting any cable other than a LAN cable in the LAN port can damage the unit.  
 
- 11 -  
   
Connections and settings  
Settings  
About the wireless connection  
The following settings can be performed anytime  
To obtain your network name (SSID*) and  
encryption key (password).  
in the Setup menu (> 25, 27).  
e.g.  
The default settings may be  
printed on the router. If the SSID  
and password have been  
changed, consult the person  
responsible for setting up your  
network.  
Easy Settings  
SSID XXXXXXXXXXXX  
KEY XXXXXXXXXXXX  
PIN XXXXXXXXX  
After connecting your new player for the first time  
and pressing [Í], the basic settings screen will  
appear.  
Preparation  
Turn on the TV and select the appropriate  
video input.  
For more details, refer to the  
manual supplied with the wireless broadband  
router, or contact your Internet provider.  
For more information or assistance, refer to  
(U.S. customers only)  
1 Press [Í].  
Setup screen appears.  
2 Follow the on-screen instructions to  
continue with the settings.  
If your SSID is not displayed;  
Search again by pressing the red button on the  
remote control.  
Wireless Settings  
Select a wireless network for connection.  
Press the green button to connect via  
WPS (PUSH button method).  
Easy Network Setting  
After completing “Easy Settings”, you can perform  
“Easy Network Setting”.  
SSID  
Reception  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
XXXXXXXXXX  
Follow the on-screen instructions to establish  
your connection settings.  
Search again  
OPTION  
WPS (PUSH)  
e.g., [BDT270]  
OK  
Select “Wired” or “Wireless” and press [OK].  
RETURN  
Easy Network Setting  
Select a connection mode.  
Stealth SSIDs will not be displayed; in this case,  
enter manually in the following order.  
1
To display the SSID input screen :  
[BDT270]  
Press [HOME]  
> select [OK] to select “Setup”  
> select “Player Settings”  
[BD93]  
Wired  
While displaying the HOME menu, press the  
[SETTINGS] button on the remote control  
Wireless  
OK  
RETURN  
> select “Network” and press [OK]  
> select “Network Settings” and press [OK]  
> select “Wireless Settings” and press [OK]  
> select “Connection Setting” and press [OK]  
> select “Manual setting” and press [OK]  
Enter your SSID.  
2
If your wireless network is encrypted, go to  
page 13.  
 
- 12 -  
       
Connections and settings  
If your wireless router supports WPS (Wi-Fi  
Firmware updates  
Protected SetupTM);  
You can easily set up a connection by pressing  
Occasionally, Panasonic may release updated  
firmware for this unit that may add or improve the  
way a feature operates. These updates are  
available free of charge.  
the green button on the remote control.  
If your wireless network is encrypted;  
Enter your encryption key (password).  
You can switch between capital and lower case  
letters by pressing the “Shift” key.  
An USB keyboard can be used, but only for the  
keys displayed on the screen.  
This unit is capable of checking the firmware  
automatically when connected to the Internet via  
a broadband connection.*  
When a new firmware version is available, the  
following message is displayed.  
Encryption Key (Password)  
l
Firmware Update  
Shift  
Delete  
Finish  
1
2
3
:
4
~
5
6
7
,
8
9
0
New Version:  
Current Version: X.XX  
X.XX  
Do you want to start firmware update?  
For the update information, please visit the  
following website:  
.
#
@
;
*
`
Space  
/
_
-
Symbols  
Alphanumeric  
Other Characters  
Yes  
No  
OK  
RETURN  
OK  
RETURN  
'PVGTꢀꢁECUGꢀUGPUKVKXGꢂ  
You can also download the latest firmware from  
the following website and store it to a USB device  
to update the firmware.  
(This site is in English only.)  
Refer to the owner’s manuals of the hub or router.  
Do not use this unit to connect to any wireless network for  
which you do not have usage rights.  
Using these networks may be regarded as illegal  
access.  
DO NOT DISCONNECT the unit from the AC  
power or perform any operation while the update  
takes place.  
After the firmware is installed, unit will restart and  
the following screen will be displayed.  
e.g.,  
If you have trouble getting online on your PC after  
performing network settings on this unit, perform the  
network settings on your PC.  
Please be aware that connecting to a network without  
encryption may result in the leaking of data such as  
personal or secret information.  
* SSID:  
An SSID (Service Set IDentification) is a name used by  
wireless LAN to identify a particular network.  
Transmission is possible if the SSID matches for both  
devices.  
The firmware was updated.  
Current Version x.xx  
:
RETURN  
To show the firmware version on this unit.  
(> 27, “Firmware Version Information”)  
Downloading will require several minutes. It may take  
longer or may not work properly depending on the  
connection environment.  
If you do not want to check for the latest firmware version,  
set “Automatic Update Check” to “Off”. (> 27)  
*
You must agree to the terms of use for the Internet function  
and the privacy policy. ([BDT270] > 15, “Notice”,  
[BD93] > 26, “Notice”)  
 
- 13 -  
       
Playback  
Playback  
Inserting or removing  
media  
Notes  
When inserting a media item, ensure that it is  
facing the correct way, which is the right side  
facing up.  
If you connect a Panasonic product with a USB  
connection cable, the setup screen may be  
displayed on the connected equipment. For  
details, refer to the instructions for the  
connected equipment.  
CAUTION  
Do not place objects in front of the unit. The disc  
tray may collide with objects when it is opened,  
and this may cause malfunction.  
 
- 14 -  
   
Playback  
Videos/Photos/Music  
HOME menu  
Play back the contents. (> 16)  
Major functions of this unit can be operated from  
the HOME menu.  
Disc  
USB  
When multiple contents are  
recorded, select the types of  
contents or the title.  
Preparation  
Turn on the TV and select the appropriate video  
input.  
[BDT270]  
Network  
1 Press [Í] to turn on the unit.  
Network  
Service  
Displays the Home Screen of  
Network Service. (> 18)  
After network service introduction banner is  
shown, the HOME menu is displayed.  
–When connected to the network, the  
banner content may be changed.  
–You can disable the “Start-up Banner”  
(> 27).  
DLNA Client (> 19)  
Miracast (> 19)  
Home  
Network  
Media Renderer (> 20)  
[BD93]  
2
Press [OK] or [  
3
,
4
,
2
,
1] to select the item.  
Network  
If there are any other items, repeat this  
step.  
Network  
Service  
Displays the Home Screen of  
Network Service. (> 18)  
Miracast  
(> 19)  
[BDT270]  
Setup  
HOME  
Player  
Settings  
Network  
Blu-ray Disc Player  
(> 23)  
USB  
Management  
Photos  
Setup  
Music  
(> 17)  
Changes the background of  
HOME menu.  
Videos  
Wallpaper  
Setup  
Notice  
[BDT270]  
Notice  
Displays the terms of service for the cloud  
services.  
To show the HOME menu  
Press [HOME].  
Items to be displayed may vary with the media.  
 
- 15 -  
   
Playback  
Playback  
Search/Slow motion  
Search  
1 Insert the media.  
While playing, press [SEARCH6] or  
[SEARCH5].  
Playback starts depending on the media.  
2 Select the item to play and press [OK].  
Slow motion  
Repeat this step if necessary.  
While paused, press [SEARCH5].  
Xvid [For_Canada], MKV, MP4 and MPEG2: Not  
effective.  
DISCS CONTINUE TO ROTATE WHILE MENUS ARE  
DISPLAYED. Press [STOP] when you have finished  
playback to protect the unit’s motor, your TV screen and so  
on.  
It is not possible to play back AVCHD and MPEG2 videos  
which have been dragged and dropped or copied and  
pasted to the media.  
The speed increases up to 5 steps.  
Music, MP3, etc.: The speed is fixed to a single  
step.  
Press [1PLAY] to revert to normal playback  
speed.  
Skip  
Operations during playback  
While playing or paused, press [:] or  
[9].  
Skip to the title, chapter or track.  
The following functions may not work depending  
on the media and contents.  
Stop  
Frame-by-frame  
Press [STOP].  
The stopping point is memorized.  
While paused, press [1] (;1).  
Press and hold to fast forward.  
Press [1PLAY] to revert to normal playback  
speed.  
Xvid [For_Canada], MKV, MP4 and MPEG2: Not  
effective.  
Resume play function  
Press [1PLAY] to restart from this point.  
The point is cleared if the media is removed.  
On BD-Video discs including BD-J, the  
resume play function does not work.  
Changing soundtrack  
Pause  
Press [AUDIO].  
You can change the audio channel number or  
soundtrack language, etc.  
Press [;PAUSE].  
Press [;PAUSE] again or [1PLAY] to restart  
play.  
Show top menu/pop-up  
menu  
Press [POP-UP MENU/TOP MENU].  
Select the item and press [OK].  
 
- 16 -  
               
Playback  
Show the status messages  
Enjoying BD-Live  
While playing, press [STATUS].  
With “BD-Live” discs, you can enjoy bonus  
contents that use Internet access.  
For this BD-Live function, connection of a USB  
device is necessary along with Internet connection.  
The status messages give you information about  
what is currently being played. Each time you  
press [STATUS], the display information may  
change or disappear from the screen.  
Depending on media and contents, the display  
may change or not appear.  
1 Perform network connection and settings.  
(> 11, 12)  
e.g., BD-Video  
2 Connect a USB device with 1 GB or more  
free space.  
A
B
The USB device is used as the local storage.  
BD-Video  
Play  
T1 C1 0:05.14  
0:20.52  
D
3 Insert the disc.  
C
A
B
C
D
T: Title, C: Chapter, PL: Playlist  
Elapsed time in the title  
Current position  
Deleting data on the USB device  
Select “USB Management” in the HOME menu  
(> 15), then select “BD-Video Data Erase” and  
press [OK].  
Total time  
e.g., JPEG  
1 / 26  
Date  
11/12/2007  
500 X 375  
The usable functions and the operating method may vary  
with each disc, please refer to the instructions on the disc  
and/or visit their website.  
“BD-Live Internet Access” may need to be changed for  
certain discs (> 26).  
Size  
Manufacturer  
Equipment  
[BDT270]  
Slideshow  
Enjoying 3D video and  
photos  
Play a slideshow of photos and adjust various  
settings during the playback.  
Preparation  
Connect this unit to a 3D compatible TV. (> 10)  
Perform the necessary preparations for the TV.  
1 Insert the media.  
2 Select “Photos”.  
Play back following the instructions displayed  
on the screen.  
3D Settings (> 22, 25)  
3 Select an item and press the green button.  
The following items can be set.  
Start the slideshow.  
Start  
Slideshow  
You can display still pictures in  
the selected folder one by one at  
a constant interval.  
Please refrain from viewing 3D images if you do not feel  
well or are experiencing visual fatigue.  
In the event that you experience dizziness, nausea, or  
other discomfort while viewing 3D images, discontinue use  
and rest your eyes.  
3D video might not output the way it is set in “HDMI  
Resolution” and “24p(4K)/24p Output” (> 23).  
When playing back 3D photos from “Photos” screen, select  
from the “3D” list. (Still pictures in “2D” are played back in  
2D.)  
Display  
Interval  
Change the display interval.  
Transition  
Effect  
Select the effect when sliding  
pictures.  
If “2D” and “3D” indications are not displayed, press the red  
button on the remote control to switch the view of playback  
contents.  
Repeat Play Set whether to repeat the slideshow.  
Still pictures displayed as “  
” cannot be played back  
with this unit.  
 
- 17 -  
         
Playback  
Network Service  
When playing content in the media, Network Service  
(Enjoying Netflix, etc.)  
An USB keyboard can be used, but only for the keys  
displayed on the screen. It may not be used depending on  
the service.  
Setup menu items.  
– When restricting the use of Network Service  
(> 26, “Network Service Lock”)  
– When correcting the displayed time  
Network Service allows you to access some  
specific websites supported by Panasonic.  
[BD93] This unit has no full browser function and  
some features of websites may not be available.  
Some services, such as Netflix require a  
registered account.  
For details of your Netflix account, refer to  
Netflix.  
(> 26, “Time Zone”, “DST”)  
– When using another device such as a smartphone in  
device  
(> 26, “Remote Device Operation”)  
When using a slow Internet connection, the video may not  
be displayed correctly. A high speed Internet service with a  
speed of at least 6 Mbps is recommended.  
Be sure to update the firmware as soon as a firmware  
update notice is displayed on the screen. If the firmware is  
not updated, you may not be able to use Network Service  
function properly. (> 13)  
Network Service provides a variety of  
selected Internet services such as the  
following.  
Online movie rental service  
Video browsing service  
Network Service Home Screen is subject to change  
without notice.  
The services through Network Service are operated by  
their respective service providers, and service may be  
discontinued either temporarily or permanently without  
notice. Therefore, Panasonic will make no warranty for the  
content or the continuity of the services.  
[BDT270]  
*
XXXXXX  
XXXXX  
X
XXXX  
XXXXXXXXXXXXXXXXXXXX  
XXXXXXXX  
Some features of websites or content of the service may  
not be available.  
XXXXXX  
F
MORE  
Some content may be inappropriate for viewers.  
Some content may only be available for specific countries  
and may be presented in specific languages.  
BACK  
XXXXXXXXXXX  
XXXXXXXX  
XXXX  
XXXX  
Market  
Internet  
*
Images are for illustration purposes, contents may change  
without notice.  
Preparation  
Network connection (> 11)  
Network settings (> 12)  
1 Press [INTERNET].  
Netflix can be accessed directly by pressing  
[NETFLIX] button even when this unit is off.  
2 Select the item and press [OK].  
To exit from Network Service  
Press [HOME].  
 
- 18 -  
   
Playback  
Home Network feature  
[BDT270]  
Before using the following features, be sure to  
Playing back contents on  
the DLNA server  
configure the connected equipment on your  
Home Network.  
You can share photos, videos and music stored in  
the DLNA Certified media server (PC with  
Windows 7 installed, smartphone, etc.) connected  
to your home network.  
Using MiracastTM  
You can enjoy the content you are viewing on a  
Miracast-compatible smartphone, etc. on the big  
screen of your TV.  
Compatible with AndroidTM devices, ver. 4.2 and  
above and Miracast certified.  
About support format of DLNA (> 33).  
For information on whether the smartphone,  
etc. supports Miracast, contact the  
manufacturer of the device.  
Server  
Player  
Preparation  
1
Perform network connection (> 11) and  
network settings (> 12) of this unit.  
Add the contents and folder to the libraries of  
the Windows Media® Player or the  
smartphone, etc.  
2
Playlist of Windows Media® Player can play  
back only the contents that are stored in the  
libraries.  
Miracast  
Player  
compatible device  
1 Press [HOME].  
1
[BDT270]  
2 Select “Network”.  
3 Select “Home Network”.  
4 Select “DLNA Client”.  
Press [MIRACAST].  
[BD93]  
Press [HOME].  
> Select “Network”.  
> Select “Miracast”.  
The list can be updated by pressing the red  
button on the remote control.  
The connection method can be switched to  
Wi-Fi Direct by pressing the green button  
on the remote control.  
2 Operate the Miracast compatible device.  
On the device, enable Miracast and select  
this unit as the device to be connected.  
For details, refer to the instructions supplied  
with the device.  
5 Select the equipment and press [OK].  
6 Select the item to play and press [OK].  
To exit from Miracast  
Press [HOME].  
You may be able to use convenient  
functions depending on the content by  
pressing [OPTION].  
To exit from Home Network  
Press [HOME].  
 
- 19 -  
           
Playback  
[BDT270]  
[BDT270]  
Using the Digital Media  
Controller  
You can use a smartphone or tablet as the Digital  
Media Controller (DMC) to playback contents  
from DLNA server on the Renderer (this unit).  
About DLNA and Media renderer  
For more details, refer to the following website  
and the owner’s manuals for each of the  
equipment.  
(This site is in English only.)  
Possible applications:  
[BDT270] Wi-Fi Direct connection while using Home  
Network feature is only temporary, and the network  
connection method returns to the original setting when  
exiting.  
Depending on the device or connection environment, the  
data transfer rate may decrease.  
Depending on the contents and the connected equipment,  
playback may not be possible.  
*
Server  
Renderer  
*
Items displayed in gray on the display cannot be played  
back by this unit.  
Controller  
*
Server  
+
Renderer  
Controller  
*
DMC compatible software should be installed.  
Preparation  
Perform steps 1and 2. (> 19)  
3
Perform the “Remote Device Settings”.  
(> 26)  
You can register up to 16 devices.  
1 Press [HOME].  
2 Select “Network”.  
3 Select “Home Network”.  
4 Select “Media Renderer”.  
5 Select “Home Network” or “Wi-Fi Direct”  
and press [OK], then follow the indications  
on the screen.  
6 Operate the DMC compatible devices.  
To exit from Media Renderer screen  
Press [HOME].  
 
- 20 -  
   
Settings  
Settings  
Option menu  
“HDMI CEC”  
A variety of playback operations and settings can  
be performed from this menu.  
This unit supports “HDMI CEC” (Consumer  
Electronics Control) function.  
Available options differ depending on the playing  
contents and the condition of the unit.  
You can use this function by connecting the  
equipment that supports “HDMI CEC”. See the  
owner’s manuals for connected equipment for  
operational details.  
1 Press [OPTION].  
When playing music, select “Playback  
Preparation  
Settings” and press [OK].  
1
2
3
Set “HDMI CEC” to “On” (> 27). (The default  
setting is “On”.)  
Set the “HDMI CEC” operations on the  
connected equipment (e.g., TV).  
Turn on all “HDMI CEC” compatible  
equipment and select this unit’s input channel  
on the connected TV so that the “HDMI CEC”  
function works properly.  
Repeat this procedure when the  
connections or settings are changed.  
[BDT270]  
e.g., BD-Video  
Operation Menu  
Soundtrack  
1ENG DTS-HD MSTR ...  
Subtitle  
Angle  
Repeat Play  
Status  
Off  
Primary Video  
Secondary Video  
Zoom  
MPEG-4 AVC  
Top Menu  
Pop-up Menu  
Closed Caption  
2 Select an item and change the settings.  
Automatic input switching  
Power on link  
To exit the screen  
Press [OPTION].  
When the unit starts playback, the TV will  
automatically switch the input channel and the  
screen of the unit will be displayed.  
Additionally when the TV is off, the TV will  
automatically turn on.  
Regarding Language: (> 34)  
Operation Menu  
Soundtrack  
Show or change the soundtrack.  
Power off link  
Audio channel  
Select the audio channel number.  
All connected equipment compatible with “HDMI  
CEC”, including this unit, automatically turns off  
when you switch the TV off.  
Subtitle  
Change the subtitle settings.  
Angle  
Select the number of the angle.  
Easy control only with TV  
remote control  
Repeat Play  
Select the item that you want to repeat.  
You can repeat the playback of a chapter,  
playlist, the entire disc, etc., but the items  
displayed will differ depending on the type of  
the media.  
By using the TV remote control, you can perform  
the same operations as you use the remote  
control of this unit. (> 8)  
Select “Off” to cancel.  
This unit supports the “HDMI CEC” (Consumer Electronics  
Control) function. However, operation cannot be  
guaranteed on all HDMI CEC devices.  
 
- 21 -  
                 
Settings  
Shuffle  
Closed Caption (> 25)  
You can only set “Manual setting” and “CC Reset”  
in the Setup menu.  
Select whether or not to play random.  
Start Slideshow  
Start the slideshow.  
Video Settings  
Status  
Show the status messages.  
Picture Mode  
Select the picture quality mode during play.  
If you select “User”, you can change settings in  
“Picture Adjustment”.  
[BDT270]  
Audio  
Select the soundtrack and audio channel number  
during the playback of DLNA.  
Picture Adjustment  
Specific picture quality settings can be changed.  
[BDT270]  
Wi-Fi Reception  
Progressive  
Select the method of conversion for progressive  
output to suit the type of material being played.  
The radio wave status during the playback of  
DLNA is displayed. (Only when a wireless  
connection is used)  
When the content is distorted, change the  
settings from “Auto” to “Video”.  
Rotate Right  
Rotate Left  
Rotate the still picture.  
24p  
Movies and other material recorded on  
DVD-Video at 24p are output at 24p.  
[BDT270] Only when you have selected “24p(4K)”  
or “24p” in “24p(4K)/24p Output” (> 23).  
[BD93] Only when you have selected “On” in “24p  
Output” (> 24).  
Wallpaper  
Set the still picture to the wallpaper of HOME  
menu. (> 15)  
Video  
The recording method of original video appears.  
Reset to Default Video Settings  
Return video settings to the factory defaults.  
Primary Video  
The recording method of original primary video  
appears.  
[BDT270]  
Secondary Video  
3D Settings  
Signal Format  
Select on/off for images. The  
recording method of original  
Video  
video appears.  
Original  
Keep original picture format.  
During search/slow motion, only  
the primary video is displayed.  
3D picture format comprising of  
left and right screens.  
Side by side  
Select on/off for audio and the  
language.  
Converts 2D pictures to 3D  
effect.  
Soundtrack  
2D to 3D  
Zoom  
Videos and pictures are magnified.  
Distance  
Set the amount of depth perception.  
Top Menu  
Display Top Menu.  
Pop-Out Level  
3D position for the Option menu or message  
screen, etc. can be adjusted during 3D playback.  
Pop-up Menu  
Display Pop-up Menu.  
Menu  
Display Menu.  
 
- 22 -  
                 
Settings  
Setup menu  
Video  
Change the unit’s settings if necessary. The  
settings remain intact even if you switch the unit  
to standby.  
Picture Mode (> 22)  
Picture Adjustment (> 22)  
Some items are common to the Option menu. You  
can get the same effect with both menus.  
HDMI Output  
Press [OK] to show the following settings:  
1 Press [HOME].  
¾HDMI Resolution  
[BD93] “Player Settings” (step 3) can be  
accessed directly by pressing [SETTINGS]  
button.  
The items supported by the connected devices  
are indicated on the screen as “¢”. When any  
item without “¢” is selected, the images may be  
distorted.  
2 Press [OK] to select “Setup”.  
If “Auto” is selected, the best suited output  
resolution to the connected TV is  
3 Select “Player Settings”.  
automatically selected.  
[BDT270]  
To enjoy high-definition video up-converted to  
1080p, you need to connect the unit directly  
to 1080p compatible HDTV (High Definition  
TV). If this unit is connected to an HDTV  
through other equipment, the other equipment  
must also be 1080p compatible.  
Player Settings  
Picture Mode  
Normal  
Video  
Audio  
3D  
Picture Adjustment  
HDMI Output  
Language  
Network  
Ratings  
System  
[BDT270]  
¾24p(4K)/24p Output  
OK  
RETURN  
This setting is for selecting the output method  
for content recorded in 24p*1, such as movies.  
4 Select an item and change the settings.  
Outputs signals by upconverting  
24p(4K)  
them to 4K*2.  
To exit the screen  
Press [HOME].  
24p  
Outputs in 24p.  
Connect the compatible TV for each (4K or  
1080/24p) output to the HDMI AV OUT  
terminal of this unit.  
“24p(4K)” works only when playing back in  
2D.  
When playing DVD-Video, set this setting to  
“24p(4K)” or “24p”, and then “24p” in “Video  
Settings” (> 22) to “On”.  
When BD-Video/DVD-Video images other  
than 24p are played, images are output at  
60p.  
 
- 23 -  
       
Settings  
[BD93]  
¾24p Output  
¾Dolby D/Dolby D +/Dolby TrueHD  
¾DTS/DTS-HD  
[BDT270]  
When this unit is connected to a TV supporting  
1080/24p output, movies and other material  
recorded at 24p*1 are output at 24p.  
When playing DVD-Video, set to “On” and  
then set “24p” in “Video Settings” (> 22) to  
“On”.  
When BD-Video/DVD-Video images other  
than 24p are played, images are output at  
60p.  
¾DSD Output Mode  
Select the audio signal to output.  
Select “PCM” or [BDT270] “Off”, when the  
connected equipment cannot decode the  
respective audio format. This unit decodes  
the audio format and transmits to the  
connected equipment.  
If you do not make proper settings the audio  
may be static or noisy.  
¾Deep Color Output  
¾BD-Video Secondary Audio  
Select whether or not to mix the primary and  
secondary audio (including the button click  
sound).  
If “Off” is selected, the unit outputs the primary  
audio only.  
This setting is for selecting whether to use Deep  
Color Output when a TV that supports Deep  
Color is connected.  
¾Contents Type Flag  
Depending on the playback content, the TV will  
output adjusting to the optimal method when a  
TV that supports this function is connected.  
Downmix  
Select the downmix system of multi-channel to  
2-channel sound.  
Select “Surround encoded”, when the  
connected equipment supports the virtual  
surround function.  
*1  
*2  
A progressive image recorded at a rate of 24 frames per  
second (motion-picture film). Many BD-Video movie  
contents are recorded in 24 frames/second in accordance  
with the film materials.  
A high resolution image/display technology of  
approximately 4000 (width) k 2000 (height) pixels.  
The downmix effect is not available when  
“Digital Audio Output” is set to “Bitstream”.  
The audio will be output in “Stereo” in the  
following cases:  
Audio  
Dynamic Range Compression  
– AVCHD playback  
– Playback of secondary audio (including the  
button click sound).  
You can listen at low volumes but still hear  
dialogue clearly.  
(Dolby Digital, Dolby Digital Plus and Dolby  
TrueHD only)  
“Auto” is effective only when playing Dolby  
TrueHD.  
DTS Neo:6  
2ch (2.1ch) audio is expanded to 7ch (7.1ch).  
This function works when the following  
conditions are met:  
– Audio recorded at 96 kHz or lower is output.  
– “Digital Audio Output” is set to “PCM” when  
audio other than PCM is output.  
Digital Audio Output  
Press [OK] to show the following settings:  
 
- 24 -  
     
Settings  
Subtitle Text  
[BDT270]  
Select a desired item according to the language  
used for MKV/Xvid [For_Canada] subtitles text.  
This item is displayed only after playing back a  
file.  
3D  
3D BD-Video Playback  
Select the playback method of 3D compatible  
video software.  
On-screen Language  
Choose the language for menus and on-screen  
messages.  
3D Playback Precautions  
Set to display or hide the 3D viewing warning  
screen when playing back the 3D compatible  
video software.  
Closed Caption  
Closed captioning services are dependent on  
contents, and the unit can display closed captions  
of both digital and analog types.  
Pop-Out Level (> 22)  
Press [OK] to show the following settings:  
¾Closed Caption Display  
Language  
Set whether or not to display closed captions.  
Audio Language  
¾Closed Caption Type  
Choose the language for audio.  
Select the closed caption type that matches the  
one of the content to be played back.  
If “Original” is selected, the original language of  
each disc will be selected.  
When the selected language is not recorded on  
the disc, or depending on how the navigation is  
created on the disc, it may playback in a  
different language than the selected language.  
Enter a code (> 34) when you select “Other  
¢¢¢¢”.  
¾Analog CC  
Select the channel of analog closed captions.  
¾Digital CC  
Select the channel of digital closed captions.  
¾Manual setting  
Subtitle Language  
Set the display style of closed captions.  
Choose the language for the subtitle.  
When “Auto” is selected, a subtitle for the  
language selected in the “Audio Language” is  
displayed only when the language other than  
the language selected in the “Audio Language”  
is played back.  
¾CC Reset  
Restore the default “Closed Caption” settings.  
Network  
When the selected language is not recorded on  
the disc, or depending on how the navigation is  
created on the disc, it may playback in a  
different language than the selected language.  
Enter a code (> 34) when you select “Other  
¢¢¢¢”.  
Easy Network Setting (> 12)  
Network Settings  
Perform network-related settings individually.  
Press [OK] to show the following settings:  
Menu Language  
[BDT270]  
Choose the language for the disc menus.  
Enter a code (> 34) when you select “Other  
¢¢¢¢”.  
¾LAN Connection Mode  
Select the LAN connection method.  
 
- 25 -  
                       
Settings  
¾Wireless Settings  
¾Remote Device Settings (> 18, 20)  
This allows the wireless router and connection  
settings to be set up. Current connection  
settings and connection state can be checked.  
Press [OK] to show the following settings:  
Press [OK] to show the following settings:  
Remote Device Operation  
Enable to start Network Service on this unit  
by using another device such as Smartphone,  
etc.  
[BDT270] Enable to operate the unit by DMC.  
If “On” is selected, “Quick Start” will be  
activated.  
Connection Setting  
The wireless router connection wizard will be  
displayed.  
Double Speed Mode Setting (2.4GHz)  
Set the connection speed for a 2.4 GHz  
wireless format.  
If you connect using the “Double Speed  
Mode (40MHz)”, 2 channels use the same  
frequency band, and there is consequently  
a greater risk of reception interference. This  
can cause the connection speed to drop or  
become unstable.  
Setting Unit Name  
Set the name of this unit to be displayed on  
the connected equipment.  
[BDT270]  
Registration Type  
Allow connections to all the  
Auto  
equipment accessing this unit.  
Set the permission for  
¾IP Address/DNS Settings  
Manual  
individual equipment  
connections accessing this unit.  
This is for checking the state of the network  
connection and setting the IP address and  
DNS-related.  
[BDT270]  
Remote Device List  
Press [OK] to show the respective setting.  
¾Proxy Server Settings  
Registering/deregistering of the displayed  
equipment can be performed when “Manual”  
in “Registration Type” is selected.  
This is for checking the state of connection with  
the Proxy server and performing settings.  
Press [OK] to show the respective setting.  
¾BD-Live Internet Access (> 17)  
¾Network Service Settings (> 18)  
You can restrict Internet access when BD-Live  
functions are used.  
Press [OK] to show the following settings:  
If “Allow ( Limited )” is selected, Internet  
access is permitted only for BD-Live contents  
which have content owner certificates.  
Time Zone  
Set the unit’s time to match your location.  
Some Network Service contents require the  
time zone to be set. Set time zone if  
necessary.  
[BD93]  
Notice  
Displays the terms of service for the cloud  
services.  
DST  
Select “On” when using Daylight Saving time.  
[BDT270]  
Ratings  
¾Network Drive Connection  
The following items use the same password.  
Don’t forget your password.  
This unit can access a hard disk shared folder  
on a network and play back videos, still  
pictures, and music.  
DVD-Video Ratings  
For the setting and operation method of  
connected equipment, refer to the following  
website.  
(This site is in English only.)  
Set a ratings level to limit DVD-Video play.  
BD-Video Ratings  
Set an age limit of BD-Video play.  
Network Service Lock  
You can restrict the usage of Network Service.  
 
- 26 -  
               
Settings  
¾HDMI CEC  
System  
Set to use “HDMI CEC” function when  
connected to a device that supports “HDMI  
CEC”.  
Select “Off” when you do not want to use  
“HDMI CEC”.  
Easy Settings  
You can execute basic settings.  
Display Settings  
Press [OK] to show the following settings:  
Start-up Banner  
Select whether to display the banner after turning  
on this unit. (> 15)  
¾TV Aspect  
Set to match the type of TV connected.  
When connected to a 4:3 aspect TV and playing  
16:9 ratio image:  
Quick Start  
Speed of start-up from standby mode is  
increased.  
When set to “On”, the internal control unit will be  
powered and the idle power consumption will  
increase so compared to when set to “Off”.  
(Power consumption > 32)  
The sides are cut  
off so the picture  
4:3 Pan &  
Scan  
fills the screen.  
When playing  
BD-Video, video is output as “4:3  
Letterbox”.  
Remote Control Code  
Black bands  
appear at the top  
and bottom of the  
picture.  
Change the remote control code if other  
Panasonic products react to this remote control.  
4:3  
Letterbox  
Firmware Update (> 13)  
Press [OK] to show the following settings:  
When connected to a 16:9 widescreen TV and  
playing 4:3 ratio image:  
¾Automatic Update Check  
When this equipment remains connected to the  
Internet, it will check for the latest firmware  
version when it is turned on and you can update  
it if necessary.  
Video is displayed as a 4:3 ratio  
16:9  
image in the center of the screen.  
Video is displayed as a  
16:9 Full  
horizontally stretched 16:9 image.  
¾Update Now  
¾Screen Saver Function  
You can update the firmware manually if a  
firmware update is available.  
This is to prevent image retention on the  
screen.  
When this is set to “On”:  
If a list of playback content is displayed and  
there is no operation for 10 minutes or more,  
the screen switches to HOME menu  
automatically.  
While playing and pausing, etc., this function  
is not available.  
System Information  
Press [OK] to show the following settings:  
¾License  
Information about the software used by this unit  
is displayed.  
¾Firmware Version Information  
Display firmware version of this unit and  
wireless LAN module.  
¾Status Messages  
Choose whether to show status messages  
automatically.  
Restore Default Settings  
This returns all values in the Setup menu and the  
Option menu to the default settings, except for  
some settings of network, ratings, remote control  
code, on-screen language, etc.  
 
- 27 -  
                     
Reference  
Reference  
Troubleshooting guide  
General operation  
Before requesting service, please perform the  
following steps.  
To return to the factory defaults.  
¾
Select “Yes” in “Restore Default Settings” in  
the Setup menu. (> 27)  
Unit does not respond to remote  
control or unit’s buttons.  
Disconnect AC power supply cord, wait 1 minute,  
then reconnect AC power supply cord.  
To return all settings to the factory preset.  
¾
Reset the unit as follows:  
1
2
Turn the unit on.  
Do you have the latest firmware installed?  
Panasonic is constantly improving the unit’s  
firmware to ensure that our customers are  
enjoying the latest technology. (> 13)  
4
Make the following checks and visit our  
website for more information.  
For U.S.A. :  
Press and hold [OK], the yellow button and  
the blue button on the remote control at the  
same time for more than 5 seconds.  
– POWER LED starts to flash, and “00 RET”  
is displayed on the screen.  
Press [1] (right) repeatedly on the remote  
control until “08 FIN” is displayed on the  
screen.  
3
4
Enter the model number.  
Press and hold [OK] for more than 5 seconds.  
For Canada :  
Or visit our website to find a service center.  
You can find a service center near you easily  
on our website.  
The remote control does not work properly.  
¾
Change the batteries in the remote control.  
(> 5)  
¾
The remote control and this unit are using  
different codes. Turn on this unit by using the  
standby/on switch on this unit, and check  
“Remote control ” which is displayed on the  
screen when you press a button on the  
remote control.  
Other support information:  
“Customer Services Directory” (  
“CONTACT INFORMATION” (  
>
36) or  
>
37).  
Press and hold [OK] and the displayed  
number (“”) for at least 5 seconds.  
The following do not indicate a problem with  
this unit:  
– Regular disc rotating sounds.  
– Image disturbance during search.  
[BDT270] Image disturbance when replacing 3D  
discs.  
The TV tuner mode is not displayed when the  
TV is turned on.  
¾
This phenomenon may occur, depending on  
the TV setting, when “Quick Start” is set to  
“On”.  
¾
Depending on the TV, this phenomenon may  
be prevented by reconnecting the HDMI cable  
to a different HDMI input terminal or by  
changing the HDMI auto connection setting.  
Cannot eject disc.  
1
Turn the unit on.  
2
Press and hold [OK], the yellow button and  
the blue button on the remote control at the  
same time for more than 5 seconds.  
– POWER LED starts to flash, and “00 RET”  
is displayed on the screen.  
This unit is turned off automatically.  
¾
To save on electricity, this unit is turned off  
automatically if there is no button operation  
for about 20 minutes when not playing back  
(such as when paused or displaying the  
menu, displaying still pictures, etc.).  
(Compatible with ENERGY STAR  
SPECIFICATIONS)  
3
4
Press [1] (right) repeatedly on the remote  
control until “06 FTO” is displayed on the  
screen.  
Press [OK].  
 
- 28 -  
     
Reference  
You have forgotten your ratings password.  
You want to cancel the ratings level.  
Picture  
¾
The ratings level returns to the factory  
defaults.  
Turn the unit on.  
The images from this unit do not appear on  
the TV.  
Picture is distorted.  
1
2
Press and hold [OK], the yellow button and  
the blue button on the remote control at the  
same time for more than 5 seconds.  
– POWER LED starts to flash, and “00 RET”  
is displayed on the screen.  
Press [1] (right) repeatedly on the remote  
control until “03 VL” is displayed on the screen.  
Press [OK].  
¾
An incorrect resolution is selected in “HDMI  
Resolution”. Reset the setting as follows:  
Turn the unit on.  
Press and hold [OK], the yellow button and  
the blue button on the remote control at the  
same time for more than 5 seconds.  
– POWER LED starts to flash.  
1
2
3
4
3
Press [8] and the blue button on the remote  
control at the same time for more than  
5 seconds.  
The TV screen turns black.  
¾
In the following cases, HDMI authentication  
takes place and a black screen is displayed:  
[BDT270] When “24p(4K)/24p Output” is set to  
“24p(4K)” or “24p”.  
[BD93] When “24p Output” is set to “On”.  
[BDT270] When the display is switched  
between 2D and 3D images.  
Set the item again. (> 23)  
– When Dolby Digital Plus, Dolby TrueHD,  
and DTS-HD® audio are not output properly,  
select “Yes” in “Restore Default Settings”  
(> 27) and make proper settings.  
¾
¾
[BDT270] When “3D BD-Video Playback” in the  
Setup menu is set to “Auto”, images may not  
be output depending on the connection  
method. After removing the disc from this unit,  
select “Set before play” in the Setup menu,  
and select “2D Playback” in the setup screen  
displayed when playing 3D discs. (> 25)  
[BDT270] When outputting in 24p (4K), images  
may be distorted depending on the HDMI  
cable. Use an HDMI cable that supports 4K  
output.  
This unit does not recognize the USB  
connection correctly.  
¾
Disconnect and re-connect the USB cable. If  
it still does not recognize the connection, turn  
this unit off and on again.  
USB devices may not be recognized by this  
unit when connected using the following :  
– a USB hub  
¾
– a USB extension cable  
¾
If you connect USB HDD to this unit, use the  
USB cable that is supplied with the HDD.  
Video is not output in high-definition.  
¾
Confirm that “HDMI Resolution” in the Setup  
menu is set properly. (> 23)  
[BDT270]  
3D video is not output.  
¾
¾
Connect to a full high-definition TV.  
Is there a non-3D compatible amplifier/  
receiver connected between this unit and a  
TV? (> 10)  
¾
¾
¾
Are the settings on this unit and the TV  
correct? (> 17)  
Is the amplifier/receiver that is connected  
between this unit and TV on?  
Depending on the connected TV, the video  
being played back might switch to 2D video  
due to changes in resolution etc. Check the  
3D setting on the TV.  
 
- 29 -  
[BDT270]  
Playback  
3D video is not output correctly as 2D.  
¾
Select “Set before play” in the Setup menu,  
and select “2D Playback” in the setup screen  
displayed when playing 3D discs. (> 25, “3D  
BD-Video Playback”)  
Disc cannot be played.  
¾
¾
The disc is dirty. (> 5)  
The disc is not finalized. (> 7)  
¾
Discs that have recorded titles with Side by  
side (2 screen structure) and that can be  
enjoyed in 3D are played back in accordance  
with the settings of the TV.  
Still pictures (JPEG) do not play back  
normally.  
¾
The images that were edited on the PC, such  
as Progressive JPEG, etc., may not be played  
back.  
No subtitles.  
When progressive output is on, closed  
captions/subtitles cannot be displayed.  
¾
I can’t play back BD-Live.  
¾
¾
¾
¾
Confirm that this unit is connected to the  
broadband Internet. (> 11)  
Connect this unit to the network by a wired  
connection.  
Confirm the “BD-Live Internet Access”  
settings. (> 26)  
The subtitles overlap closed captions  
recorded on discs.  
¾
Turn off the subtitles or the closed captions.  
(> 21, 25)  
Closed captions are not displayed.  
Confirm a USB device is connected to the  
USB port. (> 14)  
¾
¾
Confirm that the source content supports CC.  
Confirm the “Closed Caption Display” is set to  
“On”. (> 22, 25)  
¾
¾
Change the “Closed Caption Type” setting.  
(> 22, 25)  
Confirm the “Analog CC” or “Digital CC” is set  
properly (> 22, 25).  
Network  
I can’t connect to the network.  
¾
Confirm the network connection and settings.  
(> 11, 12, 25)  
A black band is displayed around the edge of  
the screen.  
The aspect ratio of the screen is abnormal.  
¾
There may be interference that prevents the  
unit from detecting your home network. Place  
the unit and the wireless router closer to each  
other. This unit may be able to detect your  
network name (> 13, “SSID”).  
¾
¾
Confirm the “TV Aspect” is set properly.  
(> 27)  
Adjust the aspect setting on the TV.  
¾
Check the owner’s manuals for each device  
and connect accordingly.  
Audio  
Cannot switch audio.  
¾
The audio cannot switch, if “Digital Audio  
Output” is set to “Bitstream” or [BDT270] “On”*.  
Set “Digital Audio Output” to “PCM” or [BDT270]  
“Off”*. (> 24)  
For “DSD Output Mode”  
*
Cannot hear the desired audio type.  
¾
Check the connections and the “Digital Audio  
Output” settings. (> 10, 24)  
 
- 30 -  
Reference  
[BDT270]  
POWER LED  
When using wireless LAN connection, video  
from the DLNA Certified media server is not  
played back or video frames are dropped  
during playback.  
When the POWER LED is flashing, check the  
message on the TV screen. If a message is not  
displayed on the TV screen, determine the type of  
the error by checking the way the POWER LED is  
flashing.  
¾
Higher transfer rate router such as 802.11n  
(2.4 GHz) wireless router may solve the  
problem. If you use 802.11n (2.4 GHz)  
wireless router, it is necessary to set the  
encryption type to “AES”.  
Flashes 6 times  
¾
The remote control and this unit are using  
different codes.  
Simultaneous use with a microwave, cordless  
telephone etc. at 2.4 GHz may result in  
connection interruptions or other problems.  
On the “Wireless Settings” screen (> 26), the  
continuous lighting of at least 4 “Reception”  
indicators is the target for a stable connection.  
If 3 or fewer indicators are lit or the  
Turn on this unit by using the standby/on  
switch on this unit, and check “Remote control  
” which is displayed on the screen when you  
press a button on the remote control.  
Press and hold [OK] and the displayed  
number (“”) for at least 5 seconds.  
¾
connection is being interrupted, change the  
position or angle of your wireless router and  
see if the connection state improves. If there  
is no improvement, connect to a wired  
network and perform the “Easy Network  
Setting” (> 12) again.  
Flashes  
The copyright protected disc cannot be  
¾
played back.  
One of the devices connected to this unit (TV,  
amplifier, etc.) does not support copyright  
protection.  
Messages on the screen  
Flashes 3 times  
¾
The disc in use cannot be played back since  
the copyright information is invalid.  
Cannot play.  
You inserted an incompatible disc (Discs  
recorded in PAL video, etc.).  
¾
Cannot display on this unit.  
¾
You tried to play a non-compatible image.  
¾
Re-insert the media.  
No disc inserted.  
The disc may be upside down.  
¾
$ This operation is not available.  
¾
Some operations are unsupported by the unit.  
(For example, reverse slow motion, etc.)  
IP address is not set.  
¾
The “IP Address” in “IP Address/DNS  
Settings” is “---. ---. ---. ---”. Set the “IP  
Address”, “Subnet Mask”, and “Default  
Gateway”. (Select the automatic address  
acquisition if necessary.)  
The current wireless network security setting  
is weak. It is recommended to change to a  
stronger security setting.  
¾
Set a stronger network security level referring  
to the wireless router owner’s manuals.  
 
- 31 -  
 
Reference  
Specifications  
File format  
General  
File format  
Extension  
Reference  
The video file and  
subtitles text file are  
inside the same folder,  
and the file names are  
the same except for the  
file extensions.  
Some MKV/Xvid files  
may not be played back  
correctly, depending on  
the video resolution,  
frame rate condition,  
subtitle format and so  
on.  
“.MKV”, “.mkv”  
Signal system  
Operating  
NTSC  
Subtitles text  
file  
“.SRT”, “.srt”,  
“.SSA”, “.ssa”,  
“.ASS”, “.ass”  
i5 oC to i35 oC  
MKV  
temperature range (i41 oF to i95 oF)  
Operating humidity 10 % to 80 % RH  
range  
(no condensation)  
“.AVI”, “.avi”  
Output connector:  
Type A (19 pin) 1 system  
HDMI AV output  
USB slot  
Subtitles text  
file  
“.SRT”, “.srt”,  
“.SUB”, “.sub”,  
“.TXT”, “.txt”  
Xvid  
[For_Canada]  
USB2.0:1 system  
[BDT270]  
Ethernet  
10BASE-T/100BASE-TX  
1 system  
Standard Compliance:  
IEEE802.11 b/g/n  
Some mp4/MPEG files  
may not be played back  
correctly, depending on  
the video resolution,  
frame rate condition and  
so on.  
mp4  
(H.264+AAC)  
“.MP4”, “.mov”  
Frequency range:  
2.4 GHz band  
“.mpg”, “.mpeg”,  
“.m2ts”, “.mts”,  
“.ts”  
MPEG  
(TS/PS)  
Wireless LAN  
Security:  
WPATM/WPA2TM  
(Encryption Type: TKIP/AES,  
Authentication Type: PSK),  
WEP (64 bit/128 bit)  
MOTION JPEG and  
Progressive JPEG are  
not supported.  
You may not be able to  
play back the file if you  
have edited the folder  
structure or the file  
name on a PC or other  
device.  
“.JPG”, “.jpg”,  
“.jpeg”  
JPEG  
Class I LASER Product  
Wave length: 790 nm (CDs)/  
660 nm (DVDs)/405 nm (BDs)  
Laser power: No hazardous  
radiation is emitted with the  
safety protection  
LASER  
Specification  
[BDT270]  
MPO  
“.MPO”, “.mpo” 3D still picture  
This unit supports ID3  
[BDT270] AC 120 V, 60 Hz  
[BD93] DC 12 V, 0.8 A (DC IN  
terminal)  
Power supply  
tags, but only titles, artist  
names and album names  
can be displayed.  
MP3  
“.MP3”, “.mp3”  
Power  
consumption  
[BDT270] Approx. 13 W  
[BD93] Approx. 11 W  
Maximum sampling rate:  
192 kHz/24 bit  
FLAC  
WAV  
“.FLAC”, “.flac”  
“.WAV”, “.wav”  
Power  
consumption in  
standby mode  
Approx. 0.5 W  
Maximum sampling rate:  
192 kHz/24 bit  
Power consumption  
in quick start standy  
mode  
This unit supports ID3  
tags.  
Maximum sampling rate:  
48 kHz/320 kbps  
[BDT270] Approx. 5 W  
[BD93] Approx. 3.5 W  
“.M4A”, “.m4a”,  
“.AAC”, “.aac”  
AAC  
[BDT270]  
312 mmk43 mmk180 mm  
(Approx. 12 5/16zk1 11/16zk  
7 2/16z)  
This unit supports ID3  
tags.  
Maximum sampling rate:  
48 kHz/385 kbps  
WMA  
“.WMA”, “.wma”  
Dimensions  
(WkHkD)  
[BD93]  
245 mmk38.5 mmk175 mm  
(Approx. 9 10/16zk1 8/16zk  
6 14/16z)  
[BDT270]  
DSD  
“.DSF”, “.dsf”,  
“.DFF”, “.dff”  
Maximum sampling rate:  
5644 kHz/8 ch  
Maximum sampling rate:  
192 kHz/24 bit/2 ch  
ALAC  
“.M4A”, “.m4a”  
[BDT270] Approx. 1.0 k  
g
(2.2 lbs)  
Mass (Weight)  
[BD93] Approx. 0.8 k (1.7 lbs)  
g
With certain recording states and folder structures, the play  
order may differ or playback may not be possible.  
Specifications are subject to change without notice.  
 
- 32 -  
     
Reference  
[BDT270]  
Audio information  
Supported format for DLNA  
File formats that are not supported by your  
The audio output differs depending on the  
settings on the unit. (> 24, “Digital Audio Output”)  
The number of channels listed is the maximum possible  
number of output channels when connected to amplifier/  
receiver compatible with the respective audio format.  
DLNA server cannot be played.  
Video  
“Digital Audio Output”  
Example of  
Container Video codec Audio codec  
file extension  
“Bitstream”/“On”*4  
“PCM”*2/“Off”*4  
AAC  
DTS®  
PCM  
Vorbis  
FLAC  
BD-Video :  
MKV  
H.264  
.mkv  
.avi  
7.1ch PCM*1  
DVD-Video :  
5.1ch PCM  
Output Outputs using  
original audio*1  
*3  
channel  
MPEG-4  
Advanced  
Xvid*  
MP3  
*1  
When “BD-Video Secondary Audio” is set to “On”, the  
audio will be output as Dolby Digital, DTS Digital  
SurroundTM or 5.1ch PCM.  
The maximum possible number of Dolby sound is 2ch PCM.  
When “DTS Neo:6” is set to “Cinema” or “Music”, 2ch  
(2.1ch) audio can be expanded to 7ch (7.1ch) and output.  
(> 24)  
[For_Canada] SimpleProfile Dolby Digital  
(ASP)  
AVCHD  
MP4  
Dolby Digital  
AAC  
.mts  
*2  
*3  
H.264  
.mp4, .mov  
Dolby Digital  
Linear PCM  
PS  
TS  
MPEG2  
.mpg, .mpeg  
.m2ts, .ts  
*4  
For “DSD Output Mode”  
MPEG2  
H.264  
AAC  
Dolby Digital  
Photo  
Format  
JPEG  
Example of file extension  
.jpg  
Audio  
Audio codec  
MP3  
Example of file extension  
.mp3  
.flac  
FLAC  
WAV  
.wav  
AAC  
.m4a  
.wma  
.m4a  
.dsf, .dff  
WMA  
ALAC  
DSD  
Linear PCM  
*
Only when the file is transcoded by DLNA server.  
 
- 33 -  
         
Reference  
Display languages list  
Display Language Display Language Display Language  
ENG  
FRA  
DEU  
ITA  
ESP  
NLD  
SVE  
NOR  
DAN  
POR  
RUS  
English JPN  
Japanese ARA  
Chinese HIN  
Korean PER  
Malay IND  
Arabic  
French CHI  
Hindi  
German KOR  
Italian MAL  
Spanish VIE  
Dutch THA  
Swedish POL  
Norwegian CES  
Danish SLK  
Portuguese HUN  
Russian FIN  
Persian  
Indonesian  
Maori  
Vietnamese MRI  
Thai BUL  
Bulgarian  
Romanian  
Greek  
Polish RUM  
Czech GRE  
Slovak TUR  
Hungarian  
Turkish  
Others  
Finnish  
Language code list  
Language Code Language Code Language Code  
Abkhazian:  
Afar:  
Afrikaans:  
Albanian:  
Amharic:  
Arabic:  
Armenian:  
Assamese:  
Aymara:  
6566 Gujarati:  
6565 Hausa:  
6570 Hebrew:  
8381 Hindi:  
7185 Rhaeto-Romance:  
7265  
8277  
8279  
8285  
8377  
8365  
7387 Romanian:  
7273 Russian:  
7285 Samoan:  
7383 Sanskrit:  
6577 Hungarian:  
6582 Icelandic:  
7289 Indonesian: 7378 Scots Gaelic: 7168  
6583 Interlingua:  
6589 Irish:  
7365 Serbian:  
8382  
7165 Serbo-Croatian:8372  
Azerbaijani: 6590 Italian:  
7384 Shona:  
7465 Sindhi:  
7487 Singhalese: 8373  
8378  
8368  
Bashkir:  
Basque:  
6665 Japanese:  
6985 Javanese:  
Bengali; Bangla:  
Kannada:  
Kashmiri:  
7578 Slovak:  
7583 Slovenian:  
7575 Somali:  
7589 Spanish:  
8375  
8376  
8379  
6983  
6678  
Bhutani:  
Bihari:  
6890 Kazakh:  
6672 Kirghiz:  
6682 Korean:  
6671 Kurdish:  
7789 Laotian:  
Breton:  
7579 Sundanese: 8385  
Bulgarian:  
Burmese:  
7585 Swahili:  
7679 Swedish:  
7665 Tagalog:  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
Byelorussian: 6669 Latin:  
Cambodian: 7577 Latvian, Lettish: 7686 Tajik:  
Catalan:  
Chinese:  
Corsican:  
Croatian:  
Czech:  
Danish:  
Dutch:  
English:  
Esperanto:  
Estonian:  
Faroese:  
Fiji:  
Finnish:  
French:  
Frisian:  
6765 Lingala:  
7678 Tamil:  
7684 Tatar:  
9072 Lithuanian:  
6779 Macedonian: 7775 Telugu:  
7282 Malagasy:  
6783 Malay:  
7771 Thai:  
7783 Tibetan:  
6865 Malayalam: 7776 Tigrinya:  
7876 Maltese:  
6978 Maori:  
7784 Tonga:  
7773 Turkish:  
7782 Turkmen:  
7779 Twi:  
7778 Ukrainian:  
7865 Urdu:  
7869 Uzbek:  
6979 Marathi:  
6984 Moldavian:  
7079 Mongolian:  
7074 Nauru:  
7073 Nepali:  
7082 Norwegian: 7879 Vietnamese: 8673  
7089 Oriya:  
7982 Volapük:  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Galician:  
Georgian:  
German:  
Greek:  
Greenlandic: 7576 Punjabi:  
Guarani: 7178 Quechua:  
7176 Pashto, Pushto:8083 Welsh:  
7565 Persian:  
6869 Polish:  
7065 Wolof:  
8076 Xhosa:  
6976 Portuguese: 8084 Yiddish:  
8065 Yoruba:  
8185 Zulu:  
 
- 34 -  
     
Reference  
AVCHD” is a trademark of Panasonic Corporation and Sony  
Corporation.  
This product incorporates the following software:  
(1) the software developed independently by or for Panasonic  
Corporation,  
(2) the software owned by third party and licensed to Panasonic  
Corporation,  
(3) the software licensed under the GNU General Public License,  
Version 2.0 (GPL V2.0),  
Java is a registered trademark of Oracle and/or its affiliates.  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
(4) the software licensed under the GNU LESSER General Public  
License, Version 2.1 (LGPL V2.1), and/or  
(5) open source software other than the software licensed under  
the GPL V2.0 and/or LGPL V2.1.  
license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, &  
DTS and the Symbol together are registered trademarks, and  
DTS-HD Master Audio is a trademark of DTS, Inc. © DTS, Inc. All  
Rights Reserved.  
The software categorized as (3) - (5) are distributed in the hope  
that it will be useful, but WITHOUT ANY WARRANTY, without  
even the implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. Please refer to the detailed  
terms and conditions thereof shown in the Player Settings menu.  
HDMI, the HDMI Logo, and High-Definition Multimedia Interface  
are trademarks or registered trademarks of HDMI Licensing LLC in  
the United States and other countries.  
At least three (3) years from delivery of this product, Panasonic will  
give to any third party who contacts us at the contact information  
provided below, for a charge no more than our cost of physically  
performing source code distribution, a complete machine-readable  
copy of the corresponding source code covered under GPL V2.0,  
LGPL V2.1 or the other licenses with the obligation to do so, as  
well as the respective copyright notice thereof.  
This product is licensed under the AVC patent portfolio license and  
VC-1 patent portfolio license for the personal and non-commercial  
use of a consumer to (i) encode video in compliance with the AVC  
Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii)  
decode AVC/VC-1 Video that was encoded by a consumer  
engaged in a personal and non-commercial activity and/or was  
obtained from a video provider licensed to provide AVC/VC-1  
Video. No license is granted or shall be implied for any other use.  
Additional information may be obtained from MPEG LA, LLC.  
Contact Information: [email protected]  
The source code and the copyright notice are also available for  
free in our website below.  
MPEG Layer-3 audio coding technology licensed from Fraunhofer  
IIS and Thomson.  
(1) MS/WMA  
This product is protected by certain intellectual property rights of  
Microsoft Corporation and third parties. Use or distribution of such  
technology outside of this product is prohibited without a license  
from Microsoft or an authorized Microsoft subsidiary and third  
parties.  
“DVD Logo” is a trademark of DVD Format/Logo Licensing  
Corporation.  
The Wi-Fi CERTIFIEDTM Logo is a certification mark of Wi-Fi  
Alliance®.  
The Wi-Fi Protected SetupTM Identifier mark is a certification mark  
of Wi-Fi Alliance®.  
(2) MS/PlayReady/Final Product Labeling  
This product contains technology subject to certain intellectual  
property rights of Microsoft. Use or distribution of this technology  
outside of this product is prohibited without the appropriate  
license(s) from Microsoft.  
“Wi-Fi®” and “Wi-Fi Direct®” are registered trademarks of Wi-Fi  
Alliance®.  
“Wi-Fi Protected SetupTM”, “MiracastTM”, “WPATM”, and “WPA2TM  
are trademarks of Wi-Fi Alliance®.  
(3) MS/PlayReady/End User Notices  
Content owners use Microsoft PlayReadyTM content access  
technology to protect their intellectual property, including  
copyrighted content. This device uses PlayReady technology to  
access PlayReady-protected content and/or WMDRM-protected  
content. If the device fails to properly enforce restrictions on  
content usage, content owners may require Microsoft to revoke the  
device’s ability to consume PlayReady-protected content.  
Revocation should not affect unprotected content or content  
protected by other content access technologies. Content owners  
may require you to upgrade PlayReady to access their content. If  
you decline an upgrade, you will not be able to access content that  
requires the upgrade.  
DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks,  
service marks, or certification marks of the Digital Living Network  
Alliance.  
Windows is a trademark or a registered trademark of Microsoft  
Corporation in the United States and other countries.  
Android is a trademark of Google Inc.  
(4) FLAC, WPA Supplicant  
The software licenses are displayed when “License” in the Setup  
menu is selected. (> 27)  
Copyright 2004-2014 Verance Corporation. CinaviaTM is a Verance  
Corporation trademark. Protected by U.S. Patent 7,369,677 and  
worldwide patents issued and pending under license from Verance  
Corporation. All rights reserved.  
 
- 35 -  
Reference  
Limited Warranty (ONLY FOR U.S.A.)  
Panasonic Products Limited Warranty  
(As examples, this excludes damages for lost time, travel to and  
Limited Warranty Coverage (For USA Only)  
from the servicer, loss of or damage to media or images, data or  
other memory or recorded content. The items listed are not  
exclusive, but for illustration only.)  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE  
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE  
PERIOD OF THE LIMITED WARRANTY.  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages, or limitations on how long an implied  
warranty lasts, so the exclusions may not apply to you.  
This warranty gives you specific legal rights and you may also  
have other rights which vary from state to state. If a problem with  
this product develops during or after the warranty period, you may  
contact your dealer or Service Center. If the problem is not  
handled to your satisfaction, then write to:  
If your product does not work properly because of a defect in  
materials or workmanship, Panasonic Corporation of North  
America (referred to as “the warrantor”) will, for the length of the  
period indicated on the chart below, which starts with the date of  
original purchase (“warranty period”), at its option either (a) repair  
your product with new or refurbished parts, (b) replace it with a  
new or a refurbished equivalent value product, or (c) refund your  
purchase price. The decision to repair, replace or refund will be  
made by the warrantor.  
Product or Part Name  
Parts  
1 Year  
Labor  
90 Days  
Blu-ray Disc Player  
All included Accessories  
(Except Non-Rechargeable  
Batteries)  
90 Days  
Not Applicable  
Not Applicable  
Consumer Affairs Department  
Panasonic Corporation of North America  
661 Independence Pkwy  
Chesapeake, VA 23320  
Only Non-Rechargeable Batteries 10 Days  
PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS  
LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.  
During the “Labor” warranty period there will be no charge for  
labor. During the “Parts” warranty period, there will be no charge  
for parts. This Limited Warranty excludes both parts and labor for  
non-rechargeable batteries, antennas, and cosmetic parts  
(cabinet). This warranty only applies to products purchased and  
serviced in the United States. This warranty is extended only to the  
original purchaser of a new product which was not sold “as is”.  
Mail-In Service--Online Repair Request  
Online Repair Request  
To submit a new repair request and for quick repair status visit our  
for all your Panasonic gear  
Go to  
Get everything you need to get the most out of  
your Panasonic products  
Accessories & Parts for your Camera, Phone, A/V  
products, TV, Computers & Networking, Personal  
Care, Home Appliances, Headphones, Batteries,  
Backup Chargers & more...  
When shipping the unit, carefully pack, include all supplied  
accessories listed in the Owner’s Manual, and send it prepaid,  
adequately insured and packed well in a carton box. When  
shipping Lithium Ion batteries please visit our Web Site at  
to providing the most up to date information. Include a letter  
detailing the complaint, a return address and provide a daytime  
phone number where you can be reached. A valid registered  
receipt is required under the Limited Warranty.  
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD,  
Customer Services Directory  
THE PURCHASER WILL BE REQUIRED TO FURNISH  
A
SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE  
OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.  
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY  
UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.  
For Product Information, Operating Assistance,  
Parts, Owner’s Manuals, Dealer and Service info  
Limited Warranty Limits and Exclusions  
For the hearing or speech impaired TTY: 1- 877-833-8855  
This warranty ONLY COVERS failures due to defects in materials  
or workmanship, and DOES NOT COVER normal wear and tear or  
cosmetic damage. The warranty ALSO DOES NOT COVER  
damages which occurred in shipment, or failures which are caused  
by products not supplied by the warrantor, or failures which result  
from accidents, misuse, abuse, neglect, mishandling,  
misapplication, alteration, faulty installation, set-up adjustments,  
misadjustment of consumer controls, improper maintenance,  
power line surge, lightning damage, modification, introduction of  
sand, humidity or liquids, commercial use such as hotel, office,  
restaurant, or other business or rental use of the product, or  
service by anyone other than a Factory Service Center or other  
Authorized Servicer, or damage that is attributable to acts of God.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS  
LISTED UNDER “LIMITED WARRANTY COVERAGE”.  
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE  
USE OF THIS PRODUCT, OR ARISING OUT OF ANY  
BREACH OF THIS WARRANTY.  
As of November 2014  
The model number and serial number of this product can be  
found on either the back or the bottom of the unit.  
Please note them in the space provided below and keep for  
future reference.  
MODEL NUMBER  
SERIAL NUMBER  
User memo:  
DATE OF PURCHASE  
DEALER NAME  
DEALER ADDRESS  
TELEPHONE NUMBER  
 
- 36 -  
   
Reference  
Limited Warranty (Only for CANADA)  
Panasonic Canada Inc.  
5770 Ambler Drive, Mississauga, Ontario L4W 2T3  
PANASONIC PRODUCT - LIMITED WARRANTY  
EXCHANGE PROGRAM  
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use  
and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product  
with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your  
purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.  
Panasonic BD / DVD Player  
Panasonic Streaming Player  
One (1) year  
One (1) year  
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic  
brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in  
Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original  
packaging.  
IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR  
OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS  
REQUIRED.  
LIMITATIONS AND EXCLUSIONS  
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal  
wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or  
failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents,  
misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment  
of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand,  
humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or  
service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.  
Dry cell batteries are also excluded from coverage under this warranty.  
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR  
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time,  
travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded  
content. This list of items is not exhaustive, but for illustration only.)  
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages,  
or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty  
gives you specific legal rights and you may have other rights which vary depending on your province or territory.  
CONTACT INFORMATION  
For product operation and information assistance, please visit our Support page:  
For defective product exchange within the warranty period, please contact the original dealer.  
 
- 37 -  
   
Reference  
Referencia rápida en español  
Conecte el cable de  
alimentación de CA por  
último  
(Spanish Quick Reference)  
Conexiones básicas  
[BDT270]  
Conexión a un televisor  
compatible con HDMI  
[BD93]  
[BDT270]  
[BD93]  
Cable HDMI  
HDMI IN  
Adaptador de CA  
(incluido)  
A una toma  
de  
corriente  
[BDT270]  
[BD93]  
Cable de alimentación de CA  
(incluido)  
doméstica  
Conéctelo cuando haya realizado el resto de conexiones.  
Conexión a un televisor  
Ahorro de energía  
compatible con HDMI y a un  
amplificador/receptor  
compatible con HDMI  
Esta unidad consume una pequeña cantidad de energía  
aunque esté ajustada en el modo de espera (Accionamiento  
rápido : Desactivado, aprox. 0,5 W). Para ahorrar energía  
cuando no vaya a utilizar la unidad durante mucho tiempo,  
desenchúfela de la toma de corriente.  
Cable HDMI  
[BDT270]  
[BD93]  
HDMI IN  
(ARC)  
[BDT270]  
HDMI OUT  
(ARC)  
HDMI IN  
[BD93]  
Amplificador/Receptor  
 
- 38 -  
 
Reference  
Reproducción básica  
Preparación  
Encienda el televisor y seleccione la entrada de  
vídeo adecuada en el televisor.  
1 Pulse [Í] para encender la unidad.  
Después de conectar su nuevo reprodutor y  
pulsar el botón de encendido, aparecerá la  
pantalla de la configuración básica.  
2 Inserte el medio.  
Inicia la reproducción  
Pulse [1PLAY].  
Parada  
Pulse [STOP].  
La posición de detención se memoriza.  
Función de reanudación de la reproducción  
Pulse  
[1PLAY] para reiniciar la reproducción  
desde esta posición.  
La posición se borra si se abre la bandeja.  
En los discos BD-Video incluidos los BD-J, la función  
de reanudación de la reproducción no funciona.  
Pausa  
Pulse [;PAUSE].  
Pulse [;PAUSE] otra vez o [1PLAY] para reiniciar la  
reproducción.  
Búsqueda/Cámara lenta  
Búsqueda  
Durante la reproducción, pulse [SEARCH6]  
o [SEARCH5].  
Cámara lenta  
Durante la pausa, pulse [SEARCH5].  
La velocidad aumenta hasta 5 pasos.  
Música y MP3, etc.: La velocidad está fija en un paso.  
Pulse [1PLAY] para recuperar la velocidad de  
reproducción normal.  
Salto  
Durante la reproducción o la pausa, pulse  
[:] o [9].  
Salta hasta el título, capítulo o pista que desee  
reproducir.  
 
- 39 -  
Index  
A Audio  
Language  
P
Pop-up menu . . . . . . . . . . 16  
Changing audio . . . . . .16  
Audio . . . . . . . . . . . . . 25  
Menu. . . . . . . . . . . . . . 25  
On-screen. . . . . . . . . . 25  
Soundtrack . . . . . . . . . 21  
Subtitle . . . . . . . . . 21, 25  
Q Quick Start . . . . . . . . . . 27  
R Repeat play . . . . . . . . . . 21  
Language . . . . . . . .25, 34  
B BD-Live . . . . . . . . . . . . . .17  
C Closed Caption. . . . .22, 25  
D DLNA . . . . . . . . . . . . . . . .19  
DMC . . . . . . . . . . . . . . . . . 20  
F File format. . . . . . . . . . . .32  
Firmware update . . . . . . . 13  
H HDMI CEC . . . . . . . . . . . .21  
L LAN . . . . . . . . . . . . . . . . .11  
Restore Default  
Settings . . . . . . . . . . . . . . 27  
Resume play function . . . 16  
S Subtitle . . . . . . . . . . . . . 21  
U USB device . . . . . . . . . . . 7  
W Wireless LAN . . . . . . . . 11  
M Media Renderer . . . . . . 20  
Miracast . . . . . . . . . . . . . 19  
N Network  
Connection . . . . . . . . . 11  
Setting . . . . . . . . . 12, 25  
Network Service . . . . . . .18  
24p . . . . . . . . . . . . . . . 22, 23  
USA Only: Disposal may be regulated in your community due to environmental considerations. For  
disposal or recycling information, please visit Panasonic website:  
or call 1-888-769-0149.  
As an ENERGY STAR® Partner, Panasonic  
has determined that this product meets the  
ENERGY STAR® guidelines for energy  
efficiency.  
For Canada only: The word “Participant” is  
used in place of the word “Partner”.  
Panasonic Corporation of North  
America  
Panasonic Canada Inc.  
5770 Ambler Drive,  
Mississauga, Ontario,  
L4W 2T3  
pr  
Two Riverfront Plaza, Newark, NJ  
07102-5490  
SQW0274  
F1214JY0  
C Panasonic Corporation 2014  
 
 

Miller Electric Welder XMS 44 User Manual
MXL Microphone USB 77 User Manual
Navman GPS Receiver iCN700 User Manual
NComputing Laminator L130 User Manual
Niles Audio Stereo Receiver SVL 6 User Manual
Nokia Bluetooth Headset BH 102 User Manual
Omnimount TV Mount NC30C User Manual
Panasonic Answering Machine KX T5000 User Manual
Panasonic Plumbing Product AV HS410N User Manual
Panasonic Styling Iron EHSE60 User Manual